Start a Repair Virtual Appointment Drop Off

⭐ REAL REPAIR  ⭐

IKEA GAS OVEN NOT BAKING BUT BROILER WORKS

An IKEA gas oven in Woodstock, IL, wouldn’t heat in bake mode, even though the broiler worked. AAA Appliance Service Center found that the bake igniter wasn’t glowing, despite receiving power. A replacement igniter was installed, and the technician tested the oven to confirm it was heating again.

When your oven won’t bake, preparing meals becomes a challenge. But just because one cooking function stops working doesn’t mean you need a new range. Finding the failed part can help you get back to cooking without the cost of replacing the entire appliance.

IKEA gas range serviced for an oven that would broil but not bake in Woodstock, Illinois.

serving woodstock, IL

Expert Appliance Repair Since 1950

Share

Broil Works. Bake Doesn't.

Why Does My Gas Oven Broil but Not Bake?

Many gas ovens have separate parts for baking and broiling. This means the broiler can work normally even when the bake function stops heating.

One possible cause is a failed bake igniter. This part helps light the gas burner that heats the oven during baking. If the igniter stops working, the bake burner may not light.

A faulty control, wiring problem, or gas valve issue can also prevent an oven from heating. Because gas and electrical parts are involved, a technician should test the system before replacing parts.

The Problem

A customer in Woodstock, Illinois, had an IKEA gas range that wasn't heating during the bake cycle.

The customer reported that the broiler worked fine, but the oven would not bake at all.

That meant one cooking function still worked while another did not. The next step was to find out why the bake burner wasn't heating.

The Repair

During the inspection, the technician found that the oven's bake igniter was not glowing at all, even though it was receiving power.

The bake igniter helps start the gas burner used for baking. If it fails, the oven may not heat even while the broiler continues working.

The technician identified the igniter as the part needing replacement. After the repair parts were installed, the oven was tested to check its heating operation.

The Solution

After the igniter repair, the technician tested the IKEA gas oven and confirmed it was heating properly.

The customer could keep using the existing range instead of replacing it because of one failed heating component.

With the bake function restored, the oven was ready for the meals that need more than a broiler.

Gas Ovens Won't Bake

ask us
anything

Many gas ovens use separate ignition parts for baking and broiling. A failed bake igniter can stop the bake burner from heating while the broiler still works. Other causes are also possible.

Common signs include an oven that won’t heat, takes too long to preheat, or heats only sometimes. Some failed igniters won’t glow, while others may glow but still be too weak to light the burner. Testing is needed to confirm the cause.

Yes. An igniter may receive electrical power but fail to heat or glow. In this IKEA oven, the technician found that the bake igniter had power but was not glowing.

Gas oven repairs involve electrical parts and the gas ignition system. Incorrect repairs can create safety risks. Professional diagnosis and repair are recommended, especially when the cause isn’t known.

Often, yes. If the range is otherwise in good condition, replacing a failed igniter may cost less than buying a new appliance. Compare the repair estimate with the age and condition of your range before deciding.

Real people. real service.

Call or Text (630)966-1950

The broiler works, but your oven won't bake? That's not much help when dinner needs more than a quick blast of heat. Before you start shopping for a new range, find out if a repair can save you the expense.
IKEA gas range serviced for an oven that would broil but not bake in Woodstock, Illinois.
Bake Doesn't Work? Let's Heat Things Up.
Serving Chicagoland since 1950
Book Appointment