
⭐ REAL REPAIR ⭐
A Frigidaire dishwasher in Frankfort, IL, wasn’t cleaning dishes properly. AAA Appliance Service Center found a failed wash pump and a worn, noisy drain pump. Both pumps were replaced, and the technician tested the dishwasher to confirm it was working correctly.
When your dishwasher stops getting dishes clean, you may find yourself washing everything by hand or wondering if it’s time for a new machine. But poor cleaning doesn’t always mean the dishwasher needs to be replaced. Finding the cause can help you choose a repair that gets your daily routine back on track.

dishes still dirty
Your dishwasher needs enough water pressure to spray dishes and wash away food. The wash pump moves water through the spray arms. If it fails, the dishwasher may run without cleaning properly.
Poor cleaning can also happen when spray arms are blocked, filters are dirty, or water isn’t filling as it should. The drain pump has a different job. It removes dirty water after washing and rinsing.
Before buying a new dishwasher, check the filter and make sure the spray arms can turn freely. If dishes still aren’t getting clean, a technician can help find the cause and explain your repair options.
A customer in Frankfort noticed that their Frigidaire dishwasher wasn't cleaning dishes as well as it should. The problem had started about a week before the service request.
When dishes come out dirty, using the dishwasher becomes another chore instead of a time-saver. The customer needed to find out why the machine wasn't doing its job and whether it could be repaired.
During the inspection, the technician found that the dishwasher's wash pump had failed. This pump moves water through the spray arms to clean the dishes.
The drain pump was also worn and making noise. Its job is to remove dirty water from the dishwasher.
Both pumps needed attention, so the technician replaced the wash pump and drain pump. The dishwasher was then tested to make sure it was operating correctly.
With both pumps replaced, the technician tested the Frigidaire dishwasher and confirmed it was working as it should.
Instead of replacing the whole dishwasher, the customer had the parts that needed attention repaired. Now the machine was ready to take on dirty dishes again, helping make cleanup easier and keeping an unplanned appliance purchase off the to-do list.
A dishwasher may leave dishes dirty because of blocked spray arms, dirty filters, low water flow, or a failed wash pump. In this Frigidaire repair, the technician found that the wash pump had failed.
The wash pump pushes water through the spray arms to clean your dishes. If it fails, the dishwasher may fill and run without spraying enough water to clean properly.
A failing drain pump may make unusual grinding or rattling sounds. You might also notice water left in the bottom of the dishwasher. Not every noisy pump needs replacement, so it’s important to check for blockages and other causes.
No. The wash pump moves water through the spray arms to clean dishes. The drain pump removes dirty water from the dishwasher. They perform different jobs, and either one can develop problems.
Often, yes. Many cleaning problems can be repaired without replacing the dishwasher. Compare the repair estimate with the age and condition of your appliance before deciding whether to buy a new one.

These cookies are necessary for the website to function and cannot be switched off in our systems.
These cookies help us understand how visitors interact with our website.
These cookies are used to track visitors across websites to display relevant advertisements.
These cookies enable the website to remember choices you make and provide enhanced, personalised features.